Corn Fiber (PLA) Fabric
Corn Fiber (PLA) Supplier for B2B Brands
susmaterials is a B2B corn fibre supplier serving fashion, accessories and footwear brands. We supply corn fibre in a range of finishes and specifications, with flexible minimums, fast sampling and certification documentation available on request. Request swatches or our Selection Guide to start a sourcing conversation.
Corn Fiber (PLA) Fabric at a Glance
| Material family | Bio-based synthetic fibre (PLA from corn) |
|---|---|
| Typical hand-feel | Soft, smooth, lightweight with a gentle drape |
| Best suited to | Apparel, activewear, linings, fillings, soft accessories |
| Less suited to | High-heat contact, prolonged hot-wash cycles |
| Composition note | Polylactic acid (PLA) fibre derived from corn sugars |
| Certifications | Biobased-content & OEKO-TEX-style systems on request |
This summary is qualitative and indicative; exact specifications, grades and documentation are confirmed per project during sampling.
What Is Corn Fiber (PLA)?
Corn fibre fabric is a textile made from PLA, a bio-based polymer produced by fermenting sugars from corn rather than from petroleum. Sourcing the polymer from an annually renewable crop instead of fossil feedstock is central to its low-impact story. The fibre is soft, light and moisture-managing, suiting apparel, activewear and fillings. For a deeper introduction, read our material guides.
How Is Corn Fiber (PLA) Made?
Corn is processed to extract sugars, which are fermented into lactic acid and polymerised into PLA. The PLA is melt-spun into fibre, then spun into yarn and knitted or woven into fabric and finished. Because the polymer comes from a renewable crop, the fibre offers a plant-sourced alternative to conventional synthetics.
Why Brands Choose Corn Fiber (PLA)
- Renewable, plant-based carbon: derived from corn sugars, not petroleum.
- Industrially compostable: breaks down under industrial composting conditions.
- Soft, resilient hand: a comfortable, wrinkle-resistant fabric.
- Low-odour, moisture-wicking: performs well in apparel and activewear.
Best For · Not Recommended For
Best for
- Apparel and activewear
- Linings and soft accessories
- Home textiles and fillings
- Nonwovens and packaging
Not recommended for
- High-heat applications (PLA has a lower melting point)
- Home-compost claims (industrial conditions usually needed)
- Products needing high-temperature wash/dry cycles
We would rather tell you early that a material is wrong for your product than have you discover it in production. Share your use case via our contact page and we will advise honestly.
Hand-Feel & Performance
Corn-fibre PLA fabric has a soft, resilient hand similar to fine polyester, with good moisture-wicking and low odour. It has a lower heat tolerance than conventional polyester, so finishing and care must account for that. We detail composting requirements per grade.
Certifications Available
We work within recognised certification and verification systems relevant to corn fibre, including biobased-content verification and industrial-compostability standards (e.g. OK Compost-style) for applicable grades. Documentation for specific grades is available on request as part of a sourcing conversation.
Sampling & Minimums
We keep sampling fast and minimums flexible, so emerging brands and established labels can both develop with us. Tell us your product type, target hand-feel and direction, and we will dispatch relevant swatches. We typically reply quickly to all sampling enquiries.
What We Can Supply Corn Fiber (PLA) For
We supply corn fibre for apparel, activewear, linings, home textiles and nonwovens. We can also support development with colour matching, specification selection and application guidance based on your construction method and product standard.
Frequently Asked Questions
Is corn fiber compostable?
PLA is industrially compostable under the right conditions; most grades are not certified for home composting. We confirm the standard per grade.
Is corn fiber the same as Ingeo™?
Ingeo™ is a specific third-party brand with which we are not affiliated. We supply PLA fibres of comparable construction; composition is detailed per grade.
Is corn fiber heat-resistant?
PLA has a lower melting point than conventional polyester, so it is not suited to high-heat applications. Care instructions should reflect this.
Request a swatch or a tailored quote
Tell us your product, target hand-feel and colour direction and we will send relevant Corn Fibre (PLA) Fabric swatches and a tailored quotation for your project. Fast sampling, flexible minimums and certification documents on request.
No obligation — we typically reply within one business day.
Discover More Materials
- Recycled Polyester (rPET) — a recycled performance fibre
- Corn Leather — a corn-based leather alternative
- PHA Biopolymer — a marine-biodegradable biopolymer
- Browse the full eco textiles collection
Start Sourcing Corn Fiber (PLA)
Request swatches of corn fibre and tell us about your product, or request our Selection Guide by email to compare corn fibre against other options before you sample. We typically reply quickly.